Heavy Duty H Type Aluminium Parallel Groove Clamp

H type lug is an important component used on power transmission lines. It has the function of fixing, connecting wires. The following are the main applications of H type lug.

Heavy Duty H Type Aluminium Parallel Groove Clamp Gallery

H Type

Heavy Duty H Type Aluminium Parallel Groove Clamp

Special clamp

Aluminum tap clamp H type

Application:

H type clamp is suitable for branching identical cross-sections and no need to split the main conductor.It was use for wide range conductor,Connector can be gripped in tool and slipped over line for easier installation.

Structure Feature:

Tap grooves function independently of each other.Use of one tap is required.Balance may be used of left empty.

Datas:

Technical Parameters

Type	Hole 1(mm²）	D1(mm）	Hole 2(mm²）	D2(mm）	A(mm)	B(mm)	C(mm)	H(mm)	L(mm)
AS-H1	16-35	4.8-8.2	16-35	4.8-8.2	7.1	24.3	41	15	38
AS-H2	50-95	8.3-14.5	16-50	4.8-9.5	13	36.6	60	22.5	48
AS-H3	95-95	10.0-14.5	50-95	10.0-14.5	5.4	36.4	63	22.3	64
AS-H4	95-240	13.0-22.5	16-70	4.8-11.5	14.3	50.5	80.4	30	51
AS-H5	95-240	13.0-22.5	70-150	11.6-16.0	9.4	50	83.5	32	51
AS-H6	150-240	16.2-22.5	150-240	16.2-22.5	5.1	50.5	90.6	30.3	89

H type lug is an important component used on power transmission lines. It has the function of fixing, connecting wires. The following are the main applications of H type lug.
The crimping method is a wiring method that presses aluminum wires together through pressure.

The operation steps are as follows:

1.Peel off thealuminumwires respectively to expose the inner core;
2.Insert the aluminumwire into the crimper respectively, making sure to align them correctly;
3.Hold the handle of the crimper with your hand, apply pressure, and press the aluminumwire together tightly;
4.Wrap the connector with insulating tape or pipe sleeves to ensure no leakage.

Over 18 years direct factory

SUNJ is committed to providing customers with a full range of Power transmission solutions.