CCT Copper Terminal

C type lug is an important component used on power transmission lines. It has the function of fixing, connecting wires. The following are the main applications of C type lug.

CCT Copper Terminal Gallery

CCT

CCT Copper Terminal

Special clamp
Crimp clamp CCT

Application:
Crimp clamp CCT,designed to be gripped in the jaws or dies of installation tool,and then slipped directly over line for easy installation,also used for deadending.

Structure Feature:
1.Made of pure electrolytic copper
2.High withstand to corrosion in or above the ground
3.High capacity to flow fault-currents
4.Available for copper conductors

Datas:

Technical Parameters

Type	Conductor(mm²）	Dimensions(mm)
Type	Conductor(mm²）	A	H	L	B	C
CCT-16	14.5-16	12	7.4	13	1.7	7.5
CCT-20	16.5-20	13	9.7	13	1.8	7
CCT-26	21-26	14.7	10.6	16	2.3	7
CCT-44	27-44	18.5	14	19	3.7	8.8
CCT-60	45-60	21	14.8	20	4	10.8
CCT-76	61-76	24.5	18	21	5.3	12
CCT-98	77-98	28	18.8	23	5.2	14
CCT-122	99-122	30	21	26	5.5	14
CCT-154	123-154	34	24	28	6.5	18.5
CCT-190	155-190	36.5	24.5	34	5.4	17.2
CCT-240	191-240	40	28	38	6.7	19.5
CCT-288	141-288	44	31	44	7	22.8
CCT-365	289-365	47	33.5	48	6.5	24
CCT-450	366-450	57	41	60	10	28
CCT-560	451-560	62	45	62	11	31.5
CCT-700	561-700	68	50	67	12	34.5

C type lug is an important component used on power transmission lines. It has the function of fixing, connecting wires. The following are the main applications of C type lug.
The crimping method is a wiring method that presses copper wires together through pressure.

The operation steps are as follows:

1. Peel off the copper wires respectively to expose the inner core;
2. Insert the copper wire into the crimper respectively, making sure to align them correctly;
3. Hold the handle of the crimper with your hand, apply pressure, and press the copper wire together tightly;
4. Wrap the connector with insulating tape or pipe sleeves to ensure no leakage.

Over 18 years direct factory

SUNJ is committed to providing customers with a full range of Power transmission solutions.