DTL-2S Square Head Copper And Aluminum Terminals

DTL-2S bimetallic lug is an important component used on power transmission lines. It has the function of fixing, connecting wires. The following are the main applications of DTL-2S bimetallic lug.

DTL-2S Square Head Copper And Aluminum Terminals Gallery

DTL-2S

DTL-2S Square Head Copper And Aluminum Terminals

Terminals & lugs

Bimetal lugs DTL-2S series

Application:

Used for transition connection of aluminum cable or aluminum alloy cable with copper end of electrical equipment in low voltage.

Material:Al≥99.5%,CU≥99.9%

Feature:

The solid palm eliminates the ingress of moisture

Friction welded

Prefilled with jointing compound.

Datas:

Technical Parameters

Type	φ±0.3	D±0.2	d±0.2	L±2	L1±2	W±0.2
DTL-2S-10	8.5	16	4.8	85.5	43	14
DTL-2S-16	8.5	16	5.5	85.5	43	14
DTL-2S-25	8.5	16	7	85.5	43	14
DTL-2S-35	8.5	16	8.8	85.5	43	14
DTL-2S-50	10.5	20	9.5	102	50	17.5
DTL-2S-70	10.5	20	11	102	50	17.5
DTL-2S-95	10.5	20	12.8	102	50	17.5
DTL-2S-120	13	25	14.8	123	60	21.5
DTL-2S-150	13	25	15.8	123	60	21.5
DTL-2S-185	13	32	18.2	131	62	26
DTL-2S-240	13	32	20.1	131	62	26
DTL-2S-300	13	34	22.8	150	67	32

DTL-2S bimetallic lug is an important component used on power transmission lines. It has the function of fixing, connecting wires. The following are the main applications of DTL-2S bimetallic lug.

The crimping method is a wiring method that presses copper wires together through pressure.

The operation steps are as follows:

1. Use insulation stripping pliers to strip the insulation layer of the wire;
2. Insert the terminal copper and aluminum, and insert the wire into the terminal copper and aluminum;
3. Place the wire shrink sleeve at the connection between the wire and the copper and aluminum terminal to ensure that the connection has good insulation properties;
4. Use crimping pliers to press the copper and aluminum terminals tightly to ensure a firm and reliable connection;
5. Finally, check whether the connection is firm and whether there is any short circuit, leakage, etc.

Precautions:
1. Before connecting the wires, turn off the power supply;
2. Before connecting the copper and aluminum terminals, you need to ensure that there is no voltage in the wire;
3. When connecting wires, pay attention to whether the specifications of the wires match the specifications of the copper and aluminum terminals;
4. When connecting wires, pay attention to the insulation performance of the connection and whether there is leakage, etc.;
5. When using tools, pay attention to safety and do not use damaged or invalid tools.

In short, to correctly connect copper and aluminum terminals, you need to select the appropriate terminals, prepare the corresponding tools, follow the correct steps to connect, and pay attention to some details that need to be paid attention to in the connection, so as to ensure that the connection is firm and reliable and achieve the expected results.

Over 18 years direct factory

SUNJ is committed to providing customers with a full range of Power transmission solutions.