NLL Type Electric Overhead Wire Cable Clamp Suspension Strain Tension Clamp

Dead end clamp (tension clamp or anchor clamp)
Bolt type strain clamp NLL series

Application:
NLL series aluminum alloy strain clamp(Bolt type) is suitable for aerial line up to 35kV,fixing aluminum wire or steel core minium wire on the strain pole,aerial insulation aluminum conductor and insulation aluminum cover are being used tofether,and the action is insulation protection.

Features:
1.The body is made of high-strength
2.Smooth surface long servile life
3.Easy installation
4.No waste electric energy

Datas:

Technical Parameters

1. Confirm the installation tool used
Before installing the aluminum-clad steel strand tension clamp, you first need to confirm whether the prepared installation tools meet the standard requirements. Tools usually required include wrenches, electric drills, screwdrivers, etc. If there are other special requirements, they need to be confirmed and prepared in advance before installation.

2. Install the fixing base
The position of the mounting base should be determined according to actual needs. First confirm the location and angle to be installed, then fix the mounting base at the corresponding position and use screws to fix the position.

3. Install the fixture
Install the aluminum-clad steel stranded wire on the fixed base and clamp it firmly with a clamp to ensure that the wire is in a fixed position.

4. Tighten the connecting screws
Between the clamp and the fixed base, connecting screws are required for connection. Before tightening the connecting screws, make sure the angle and position of the connecting screws are appropriate.

5. Install the anti-loosening device
In order to prevent the connecting screws from loosening, it is necessary to confirm the angle and position of the connecting screws again and install an anti-loosening device to ensure the reliability and stability of the entire power equipment.