SC-JG(A) Copper Cable Connector

Used for connection of copper cable with copper end of electrical equipment in low voltage.

SC-JG(A) Copper Cable Connector Gallery

SC-JG(A)

SC-JG(A) Copper Cable Connector

Terminals & lugs

Copper lugs SC JGA series

Application:

Used for connection of copper cable with copper end of electrical equipment in low voltage.

Material:Cu≥99.9%

Surface:tin plated

Datas：

Technical Parameters

Type	φ±0.5	D±0.5	d±0.5	L±2
SC(JGA)-6	φ6.5,φ8.5	6	4.8	24.5
SC(JGA)-10	φ6.5,φ8.5	8	5.8	39
SC(JGA)-16	φ6.5,φ8.5,φ10.5	9	6.5	42
SC(JGA)-25	φ6.5,φ8.5,φ10.5	10	7.6	47
SC(JGA)-35	φ6.5,φ8.5,φ10.5	11	8.5	52
SC(JGA)-35	φ12.5	11	8.8	52
SC(JGA)-50	φ8.5,φ10.5,φ12.5	13	10	54
SC(JGA)-70	φ8.5,φ10.5,φ12.5	16	12	62
SC(JGA)-95	φ8.5,φ10.5,φ12.5,φ14.5	18	14	64
SC(JGA)-120	φ10.5,φ12.5	19	15	72
SC(JGA)-150	φ10.5,φ12.5,φ14.5,φ16.5	21	16.8	68
SC(JGA)-185	φ12.5,φ14.5,φ16.5	24	18.8	86
SC(JGA)-240	φ12.5,φ14.5,φ16.5	26	21	91
SC(JGA)-300	φ16.5	30	24	99
SC(JGA)-400	φ16.5	31.9	25.7	110
SC(JGA)-500	φ20.5	38	30	116
SC(JGA)-630	φ20.5	45	36.3	135

Crimping method

The crimping method is a wiring method that presses copper wires together through pressure. The operation steps are as follows:
1. Peel off the copper wires respectively to expose the inner core;
2. Insert the copper wire into the crimper respectively, making sure to align them correctly;
3. Hold the handle of the crimper with your hand, apply pressure, and press the copper wire together tightly;
4. Wrap the connector with insulating tape or pipe sleeves to ensure no leakage.

Over 18 years direct factory

SUNJ is committed to providing customers with a full range of Power transmission solutions.